Modbus Serial/PROFINET IO Gateway GT200-PN-RS

1. According to the gateway's power wiring label and 24V DC power wiring.

2. Connect the Modbus serial device according to the gateway's serial port wiring label.

Pin	Function
1	D+, RS485 Data Positive, connect to device D+
2	D-, RS485 Data Negative, connect to device D-
3	GND, connect to device GND

Pin	Function
1	TX, RS232 Data Transmit, connect to device RX
2	RX, RS232 Data Receive, connect to device TX
3	GND, connect to device GND (Required for RS232)

Indicators	Status	Description
Serial I TX	Flashing Green	Serial port is sending data
Serial I RX	Flashing Green	Serial port is receiving data
Serial II TX	Flashing Green	Serial port is sending data
Serial II RX	Flashing Green	Serial port is receiving data
MS	See table below
NS	See table below

MS (Module State)	NS (Network State)	Description
OFF	Flashing Red	Start-up state, waiting to initialize
Solid Green	Flashing Red	Initialization complete, but no connection yet with PLC
Solid Green	Solid Green	PLC has connected
Other	Other	Undefined state

1. Download SST-TS-CFG software from www.sstautomation.com/Download1/ and install it.
2. Download the GSDML file for GT200-PN-RS from www.sstautomation.com/Download1/.
3. Build your configuration using SST-TS-CFG and download it to the gateway. When the download is completed, the software will prompt to "whether to restart the gateway", click "Yes".
4. Install the appropriate device description file in your PLC's PROFINET configuration tool.
5. Configure the PROFINET network as required. Make sure that the configuration matches the configuration present in the GT200-PN-RS. When GT200-PN-RS establishes a connection with the PROFINET master, the gateway will display:
MS: Solid Green, NS: Solid Green.
For more information, please refer to the GT200-PN-RS manual.

1. Connect your serial devices to the gateway’s serial interface.
Please refer to the gateway manual for more details about specific connection methods.
2. Observe the indicator lights to check the communication status.
(use the debug feature in SST-TS-CFG to view live serial data).

GT200-PN-RS Quick Start Guide